Centralized Lubrication System Spares

High Pressure Multioutlet Grease Pump that we offer comes with individual output adjustment. This pump can be used for covering lubrication points. We are named among the renowned Manufacturers and Suppliers of Grease Pump. The manufacturing of our Grease Pump is done using highly advanced techniques under the strict vigilance of experts. One can obtain the Grease Pump from us at a very reasonable price.

Technical Specifications

• No. of Outlets upto 30
• Max Delivery Pressure 350 bar
• Adjustable discharge 0.05 CC – 0.25 CC/Stroke/Outlet
• Reservior capacity – 5/10/15/30 Ltrs

Drive Motorized with worm gear reduction assembly Lubricant any oil & grease upto NLGI 2

Optional features : Pressure Relief Valve, Pressure Guage, Low Level Switch, Pressure
Plate with tell tale rod.

Accessories
Control panel for intermittent operation High Pressure Hydraulic Fittings and Seamless Pipes

Applications
Medium and Large size Presses, Earthmoving Equipments, Screw Conveyers, Punching Presses, Mixing Mills, Crushers, and Turbines etc.

Barrel Mounted Motorized Grease Transfer Pump that we offer comes with drum cover, SS filter gauge, pressure relief valve and pressure gauge (0-350kg/cm2). It is suitable for 180 kgs standard grease barrel. We are counted among the top Manufacturers and Suppliers of Motorized Grease Transfer Pump. The manufacturing of our Motorized Grease Transfer Pump is done using the latest techniques under the strict vigilance of experts.

We make available Hydraulically Operated Direction Control Valve in different models with flow rate 6000 & 14000 CC/hour. Change over pressure is set at approx. 40 bars, which is higher than actual system operating pressure. It comes with adjustable change over pressure 350 bar Max and 80 bar Min. It finds extensive usage in dual line centralized lubrication system. Hydraulically Operated Direction Control Valve can be monitored by indicator pin that provides signal after each cycle to start and stop the pump.

Electrically Operated Direction Control Valve finds extensive usage in dual line centralized lubrication system. It changes over pressure line and return line alternatively after completing one half cycle. Our Electrically Operated Direction Control Valve comes with a maximum flow rate of 21000 CC/hour and maximum operating pressure 400 kg/cm². It comprises of 24 VDC motor, eccentric cam, bearing, C bracket with plunger etc.

Our company is an eminent name, which is counted among the top Manufacturers and Suppliers of Progressive Distributor. One can use it as primary as well as secondary distributor. The input quantity of lubricant is divided as per the outlet ports combinations in Progressive Distributor. The best thing about this distributor is that it works on progressive principle according to which, no lubricant goes to next outlet unless metered quantity of lubricant is delivered from previous outlet. We make available Progressive Distributor in Model 2, 4, 6, 8, 10 & 12 outlets with respect to output in CC from 0.2 CC to 0.5 CC/outlet/cycle. All the models of Progressive Distributor are equipped with an indicator pin which moves to and fro in one cycle.

We are an experienced name, which is engaged in manufacturing and supplying Two Line Dose Feeder. The outlets of our Two Line Dose Feeder are connected parallel. Moreover, the outlet ports are connected to lubrication points by means of tubing. The functioning of entire equipment can be noticed by the movement of indicating pin. We make available Model TLDF 2, 4, 6, 8 and 10 Outlet with respect to output in CC like 2.3 & 5 CC/outlet/cycle.

Self-monitored Spray Nozzle is available with us.  It is monitored by limit or proximity switch. We are counted among the top Manufacturers and Suppliers of Monitored Spray Nozzle. It is operated by progressive dosing of lubricant. Monitored Spray Nozzle cannot operate unless both air and lubricant are available. Moreover, it always operates at right pressure. It finds extensive usage in large open gear drives of cement mill, raw mill, ball mill and kilns.

We are one of the prominent Manufacturers and Suppliers of Unmonitored Spray Nozzle. In this Spray Nozzle, lubricant is monitored through limit switch, which is attached to distributor and air is monitored through pressure switch that is installed after the last nozzle. Manufactured as per the set industry standards, our Unmonitored Spray Nozzle is high in demand in the market. It can be obtained from us at a very reasonable price.

Uses : Cement Mill, Raw Mill, Ball Mill and Kilns

High Pressure Motorised Grease Pump can be used as a central lubrication pump for oil or grease lubrication. It is used with single line progressive as well as dual line system. We are enlisted among the reputed Manufacturers and Suppliers of Motorized Pump. It can be provided with unit of filter, pressure gauge, safety valve and excess pressure switch or without the unit. Additional two ports are provided with our Motorized Pump, one for refilling oil or grease and other for return line connection which is required in case of dual line system.

Technical Specification

• No. of Outlets upto 2
• Max Delivery Pressure 450 bar
• Output/hour - 6000 CC, 8000 CC, 10000 CC, 14000 CC, 18000 CC
• Reservior capacity – 30/60/100 Ltrs

Drive Motorized with worm gear reduction assembly or with helical gear reduction box Lubricant any oil & grease upto NLGI 2

Optional Features

Pressure Relief Valve, Pressure Guage, Low Level Switch, Pressure Plate with tell tale rod or Stirr Assembly, Excess Pressure Switch assembly.

Accessories

• Electrical Control Panel for Automatic operation
• High Pressure Hydraulic Fittings and Seamless Pipes